Timbre One in Graphite: dark anodised aluminium cups, a brushed steel yoke and black leather.

Wireless · closed-back · newShown in Graphite

Wireless · closed-back · new

Timbre One

Machined aluminium, soft leather and a 40 mm driver tuned by ear. Forty hours on a charge, and quiet when you want it.

€349 incl. VAT

Colourway: Graphite

  • Free delivery in 2–4 working days
  • 30 days to change your mind
  • Two-year warranty

Made to be handled

Every part you touch is a material you would choose on purpose. Shown here in Graphite.

  • The face plate of a cup, its surface turned in fine circles, with a thin polished ring at its edge.

    The face plate

    Diamond-turned in one pass, so the fine rings catch the light as you move.

  • Close-up of the cup and the yoke: the steel arm meets the cup at a polished pivot.

    The yoke

    One arm of bead-blasted steel, its pivot turned on a lathe. The cups swivel flat to travel.

  • The ear cushion, deep and soft, wrapped in black leather with a fine grain.

    The cushions

    Slow foam in soft leather, held on by magnets. When they wear, a new pair clicks on.

  • The headband's curve in leather, stitched along both edges.

    The headband

    Leather over sprung steel, stitched along both edges. It holds without pressing.

  • The edge of the right cup with three small buttons set into it.

    Three buttons

    Volume, play and noise control, shaped so a thumb finds each one without looking.

  • Timbre One standing on black, lit from behind: a thin line of light traces the headband, the yokes and the rims of both cups.

    The outline

    Lit from behind, one line runs from cup to cup: no seams to snag on, nothing stuck on.

Tuned by ear, then measured

Timbre One leaves the middle of the range alone, where voices and most instruments live, and adds a little weight below 100 Hz so a bass line still carries in a quiet room. Two more profiles are on the cup: press the middle button twice to change.

Sound profile

Reference: the tuning it leaves the box with.

Frequency response of the selected profile against flat, from 20 Hz to 20 kHz, in decibels.

Specifications

Line drawing of Timbre One to scale: from the front, the headband arching over the two cups; from the side, the round cup under the headband.
Front and side, to scale, in millimetres.
Driver
40 mm dynamic, in a sealed chamber
Frequency response
6 Hz to 40 kHz
Noise control
Adaptive cancelling, transparency, off
Battery
Up to 40 h; 30 h with cancelling on
Charging
USB-C; ten minutes gives five hours
Connection
Bluetooth 5.4 (SBC, AAC, LC3); 3.5 mm cable
Size
176 × 103 × 196 mm
Weight
296 g
In the box
Timbre One, a felt case, a USB-C cable and a 3.5 mm audio cable

Timbre One, Graphite

€349 incl. VAT · free delivery

Your bag

Your bag is empty.

  • Free delivery in 2–4 working days
  • 30 days to change your mind
  • Two-year warranty

Checkout

All fields are required.

Contact

Delivery address

Delivery

Payment

This is a demo shop, so there is nothing to pay and no card to enter. Nothing you type here leaves this page.

Total €0